Ace NSE6_FWF-6.4 Certification with 37 Actual Questions
PASS Fortinet NSE6_FWF-6.4 EXAM WITH UPDATED DUMPS
Fortinet NSE6_FWF-6.4 exam is designed to test the knowledge and skills of IT professionals in the implementation and management of secure wireless LAN solutions. NSE6_FWF-6.4 exam covers a wide range of topics, including the deployment and configuration of Fortinet wireless access points, the use of security features such as WPA2-Enterprise and 802.1x authentication, and the integration of wireless networks with Fortinet's security solutions.
Earning the Fortinet NSE6_FWF-6.4 certification demonstrates that you have the knowledge and skills to implement and manage Fortinet's Secure Wireless LAN solutions. It is a valuable certification for professionals looking to advance their careers in network security, as well as for organizations that use Fortinet’s Secure Wireless LAN solutions and want to ensure that their staff has the necessary skills to manage them effectively.
NEW QUESTION # 19
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. SQL services must be running
- B. Wireless network security must be set to open
- C. DTLS encryption on wireless traffic must be turned off
- D. Two wireless APs must be sending data
Answer: D
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION # 20
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Social networks authentication
- B. Software security token authentication
- C. Short message service authentication
- D. Hardware security token authentication
Answer: A,C
Explanation:
Explanation
According to the web search results, FortiPresence supports social networks authentication and short message service authentication as public authentication services for guest Wi-Fi access. Social networks authentication allows visitors to log in using their existing social media accounts, such as Facebook, Twitter, LinkedIn, Google, and Instagram. Short message service authentication allows visitors to receive a one-time password via SMS to their mobile phone number. These authentication methods are convenient and secure for visitors and provide valuable data for businesses. Software security token authentication and hardware security token authentication are not supported by FortiPresence as public authentication services for guest Wi-Fi access.
References: Configuring Captive Portal | FortiPresence 1.2.0, Configuring Captive Portal | FortiPresence
22.4.0
NEW QUESTION # 21
Which statement is correct about security profiles on FortiAP devices?
- A. Security profiles can only be applied to unencrypted wireless traffic.
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
- C. Security profiles are only supported on Bridge-mode SSIDs.
- D. Security profiles can only be applied via firewall policies on the FortiGate.
Answer: B
Explanation:
Explanation
Security profiles are a feature that allows FortiAP devices to apply various security functions to the wireless traffic, such as antivirus, web filter, application control, intrusion prevention, and botnet scanning. Security profiles can be enabled on both tunnel-mode and bridge-mode SSIDs, and can be applied either through the wireless controller configuration or through firewall policies on the FortiGate device. Security profiles can also inspect encrypted wireless traffic, as long as the FortiAP device has access to the encryption keys.
Security profiles on FortiAP devices can use FortiGate subscription services to inspect the traffic, such as FortiGuard Antivirus, FortiGuard Web Filter, FortiGuard Application Control, and FortiGuard IPS. This means that the FortiAP device can leverage the latest threat intelligence and updates from Fortinet to protect the wireless network from malicious or unwanted content.
Therefore, the correct answer is D. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
References:
FortiAP-S and FortiAP-U bridge mode security profiles
Configuring security | FortiAP / FortiWiFi 6.4.2
Security profiles - Fortinet Document Library
NEW QUESTION # 22
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user movements
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user purchase activity
Answer: B
NEW QUESTION # 23
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 58 Egress-VLAN-Name
- B. 83 Tunnel-Preference
- C. 64 Tunnel-Type
- D. 65 Tunnel-Medium-Type
- E. 81 Tunnel-Private-Group-ID
Answer: C,D,E
Explanation:
Explanation
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 24
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured for captive portal authentication
- B. A VAP configured to authenticate locally on FortiGate
- C. A VAP configured to authenticate using a radius server
- D. A VAP configured for WPA2 or 3 Enterprise
Answer: C,D
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION # 25
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user movements
- D. Provides real-time insight into user purchase activity
Answer: B
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION # 26
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiSwitch
- C. FortiAP Cloud
- D. FortiGate
Answer: C,D
Explanation:
Explanation
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION # 27
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. WPA2 Enterprise
- C. WPA2 Personal and radius MAC filtering
- D. Open, with radius MAC filtering
Answer: C
NEW QUESTION # 28
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that cannot be used because of regulatory channel restrictions
- B. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that can be used only when Radio Resource Provisioning is enabled
Answer: D
NEW QUESTION # 29
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure vap-all to be manual
- B. Increase the transmission power of the AP radio interfaces
- C. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- D. Disable intra-vap-privacy for the Authors vap-wireless network
Answer: A,C
NEW QUESTION # 30
What type of design model does FortiPlanner use in wireless design project?
- A. Integration model
- B. Predictive model
- C. Architectural model
- D. Analytical model
Answer: B
NEW QUESTION # 31
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- B. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- C. Areas with the signal strength weaker than -68 dB are cut out of the map
- D. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
Answer: B
NEW QUESTION # 32
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Broadcast
- B. Static
- C. Multicast
- D. DHCP
Answer: D
NEW QUESTION # 33
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. WPA2 Enterprise
- C. WPA2 Personal and radius MAC filtering
- D. Open, with radius MAC filtering
Answer: C
NEW QUESTION # 34
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate.
Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Install supported FortiAP and configure a bridge mode wireless network
- B. Configure a bridge mode wireless network and enable the Local authentication configuration option
- C. Configure a tunnel mode wireless network and enable split tunneling to the local network
- D. Configure a bridge mode wireless network and enable the Local standalone configuration option
Answer: D
Explanation:
Explanation
Look for "Continued FortiAP operation when WiFi controller connection is down" im the link here:
https://docs.fortinet.com/document/fortiap/7.0.4/fortiwifi-and-fortiap-configuration-guide/442078/how-to-config
NEW QUESTION # 35
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to providebetter visibility.
- B. Areas with the signal strength equal or stronger than -68 dB are highlighted in green circles.
- C. Areas with the signal strength weaker than -68 dB are highlighted in orangeand red to indicate that no signal was propagated by the APS.
- D. Areas with the signal strength weaker than -68 dB are shown with blackbackground.
Answer: B
Explanation:
Explanation
The FortiPlanner site survey reading is a tool that shows the predicted signal strength of the wireless network based on the floor plan, the placement of the APs, and the propagation model. The signal strength is measured in decibels (dB), which is a logarithmic scale that indicates how much power the signal has. The higher the dB value, the stronger the signal.
The site survey reading allows the user to set a threshold value for the signal strength, which is -68 dB by default. This means that any area with a signal strength equal or stronger than -68 dB is considered to have adequate coverage for most wireless applications. These areas are highlighted in green circles on the floor plan. Any area with a signal strength weaker than -68 dB is considered to have poor coverage or no coverage at all. These areas are shown with different colors, such as yellow, orange, red, or black, depending on how weak the signal is.
Therefore, the correct answer is D. Areas with the signal strength equal or stronger than -68 dB are highlighted in green circles.
References:
FortiPlanner 2.0 User Guide, page 28
FortiPlanner Data Sheet, page 2
FortiPlanner 2.2 User Guide, page 19
NEW QUESTION # 36
Which statement is correct about security profiles on FortiAP devices?
- A. Security profiles can only be applied to unencrypted wireless traffic.
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
- C. Security profiles are only supported on Bridge-mode SSIDs.
- D. Security profiles can only be applied via firewall policies on the FortiGate.
Answer: B
Explanation:
Explanation
Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic, such as antivirus, web filtering, application control, and IPS. This feature is called local bridging and it allows the FortiAP to forward traffic to the FortiGate for security inspection before sending it to the destination network. This reduces the bandwidth consumption and latency of tunnel mode SSIDs. References: Secure Wireless LAN Course Description, page 9; [FortiOS 6.4.0 Handbook - Wireless Controller], page 46.
NEW QUESTION # 37
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- B. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- C. DARRP measurements can be scheduled to occur at specific times.
- D. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
Answer: A,B
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION # 38
......
Fortinet NSE6_FWF-6.4 certification exam is designed to validate the skills and knowledge of IT professionals in deploying, configuring, and maintaining Fortinet Secure Wireless LAN solutions. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification is aimed at network administrators, security professionals, and wireless engineers who work with Fortinet products and want to demonstrate their expertise in this area. NSE6_FWF-6.4 exam tests candidates on their ability to configure and troubleshoot Fortinet wireless access points, controllers, and security features, as well as their knowledge of wireless networking concepts, protocols, and standards.
NSE6_FWF-6.4 Questions PDF [2024] Use Valid New dump to Clear Exam: https://passleader.testpassking.com/NSE6_FWF-6.4-exam-testking-pass.html