Nov-2024 Cisco 300-715 Actual Questions and Braindumps
300-715 Dumps To Pass Cisco Exam in 24 Hours - TestPassKing
NEW QUESTION # 129
An engineer is using Cisco ISE and configuring guest services to allow wireless devices to access the network. Which action should accomplish this task?
- A. Create the redirect ACL on Cisco ISE and add it to the Cisco ISE Policy
- B. Create the redirect ACL on Cisco ISE and add it to the WLC policy
- C. Create the redirect ACL on the WLC and add it to the Cisco ISE policy.
- D. Create the redirect ACL on the WLC and add it to the WLC policy
Answer: C
NEW QUESTION # 130
When planning for the deployment of Cisco ISE, an organization's security policy dictates that they must use network access authentication via RADIUS. It also states that the deployment provide an adequate amount of security and visibility for the hosts on the network. Why should the engineer configure MAB in this situation?
- A. MAB provides user authentication.
- B. The devices in the network do not have a supplicant.
- C. The Cisco switches only support MAB.
- D. MAB provides the strongest form of authentication available.
Answer: B
NEW QUESTION # 131
Which permission is common to the Active Directory Join and Leave operations?
- A. Set attributes on the Cisco ISE machine account.
- B. Search Active Directory to see if a Cisco ISE machine account already exists.
- C. Create a Cisco ISE machine account in the domain if the machine account does not already exist.
- D. Remove the Cisco ISE machine account from the domain.
Answer: B
Explanation:
Section: Policy Enforcement
NEW QUESTION # 132
An administrator is configuring TACACS+ on a Cisco switch but cannot authenticate users with Cisco ISE. The configuration contains the correct key of Cisc039712287. but the switch is not receiving a response from the Cisco ISE instance What must be done to validate the AAA configuration and identify the problem with the TACACS+ servers?
- A. Confirm the authorization policies are correct using the test aaa authorization admin drop legacy command.
- B. Validate that the key value is correct using the test aaa authentication admin <key> legacy command.
- C. Test the user account on the server using the test aaa group radius server CUCS user admin pass <key> legacy command.
- D. Check for server reachability using the test aaa group tacacs+ admin <key> legacy command.
Answer: D
Explanation:
Reference:
https://medium.com/training-course-ccna-security-210-260/ccna-security-part-3-implementing-aaa-in-cisco-ios-4b13ab285f51
NEW QUESTION # 133
An administrator adds a new network device to the Cisco ISE configuration to authenticate endpoints to the network. The RADIUS test fails after the administrator configures all of the settings in Cisco ISE and adds the proper configurations to the switch. What is the issue"?
- A. The shared secret is incorrect on the switch or on Cisco ISE.
- B. The endpoint does not have the appropriate credentials for network access.
- C. The endpoint profile is showing as "unknown."
- D. The certificate on the switch is self-signed not a CA-provided certificate.
Answer: B
NEW QUESTION # 134
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE. What must be configured within Cisco ISE to accomplish this goal?
- A. Add the root certificate authority to the trust store and enable it for authentication.
- B. Create a certificate signing request and have the root certificate authority sign it.
- C. Add an OCSP profile and configure the root certificate authority as secondary.
- D. Create an SCEP profile to link Cisco ISE with the root certificate authority.
Answer: D
Explanation:
Ref:https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html
NEW QUESTION # 135
A network engineer is configuring guest access and notices that when a guest user registers a second device for access, the first device loses access What must be done to ensure that both devices for a particular user are able to access the guest network simultaneously?
- A. Modify the guest type to increase the number of maximum devices
- B. Use a custom portal to increase the number of logins
- C. Create an Adaptive Network Control policy to increase the number of devices
- D. Configure the sponsor group to increase the number of logins.
Answer: A
Explanation:
https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_admin_guide_27/b_ise_admin_guide_27_chapter_01111.html.xml
NEW QUESTION # 136
An organization is hosting a conference and must make guest accounts for several of the speakers attending.
The conference ended two days early but the guest accounts are still being used to access the network. What must be configured to correct this?
- A. Navigate to the Sponsor Portal and suspend the guest accounts.
- B. Create an authorization rule denying guest access.
- C. Create an authorization rule denying sponsored guest access.
- D. Navigate to the Guest Portal and delete the guest accounts.
Answer: A
NEW QUESTION # 137
A network administrator must configure Cisco SE Personas in the company to share session information via syslog.
Which Cisco ISE personas must be added to syslog receivers to accomplish this goal?
- A. policy services
- B. pxGrid
- C. monitor
- D. admin
Answer: C
NEW QUESTION # 138
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition.
However, other groups that are in the same domain are seen. What is causing this issue?
- A. Cisco ISE only sees the built-in groups, not user created ones
- B. The groups are present but need to be manually typed as conditions
- C. The groups are not added to Cisco ISE under the AD join point
- D. Cisco ISE's connection to the AD join point is failing
Answer: C
NEW QUESTION # 139
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
- A. Application Visibility and Control
- B. Supplicant Provisioning Wizard
- C. My Devices Portal
- D. Network Access Control
Answer: C
NEW QUESTION # 140
An engineer is configuring the remote access VPN to use Cisco ISE for AAA and needs to conduct posture checks on the connecting endpoints After the endpoint connects, it receives its initial authorization result and continues onto the compliance scan What must be done for this AAA configuration to allow compliant access to the network?
- A. Fix the CoA port number
- B. Enable dynamic authorization within the AAA server group
- C. Configure the posture authorization so it defaults to unknown status
- D. Ensure that authorization only mode is not enabled
Answer: B
NEW QUESTION # 141
An engineer configured posture assessment for their network access control with the goal of using an agent that supports using service conditions for the assessment. The agent should run as a background process to avoid user interruption, but the user can see it when it is run. What is the problem?
- A. The user required remediation so the agent appeared in the notifications.
- B. The selected posture agent does not support the engineer's goal.
- C. The posture module was deployed using the headend instead of installing it with SCCM.
- D. The proper permissions were not given to the temporal agent to conduct the assessment.
Answer: B
NEW QUESTION # 142
An engineer is using the low-impact mode for a phased deployment of Cisco ISE and is trying to connect to the network prior to authentication. Which access will be denied in this?
- A. DHCP
- B. EAP
- C. HTTP
- D. DNS
Answer: C
NEW QUESTION # 143
Which term refers to an endpoint agent that tries to join an 802 1X-enabled network?
- A. client
- B. EAP server
- C. authenticator
- D. supplicant
Answer: D
NEW QUESTION # 144
Which RADIUS attribute is used to dynamically assign the Inactivity active timer for MAB users from the Cisco ISE node?
- A. session timeout
- B. idle timeout
- C. termination-action
- D. radius-server timeout
Answer: B
Explanation:
Reference:
When the inactivity timer is enabled, the switch monitors the activity from authenticated endpoints. When the inactivity timer expires, the switch removes the authenticated session. The inactivity timer for MAB can be statically configured on the switch port, or it can be dynamically assigned using the RADIUS Idle-Timeout attribute
NEW QUESTION # 145
Which of these is not a method to obtain Cisco ISE profiling data?
- A. SNMP query
- B. HTTP
- C. RADIUS
- D. Netflow
- E. DNS
- F. active scans
Answer: F
NEW QUESTION # 146
......
Cisco 300-715 certification exam is a valuable credential for professionals who work with Cisco ISE solutions. Implementing and Configuring Cisco Identity Services Engine certification validates the candidate’s expertise in implementing and configuring advanced security features, integrating Cisco ISE with other security solutions, and ensuring secure guest access. Implementing and Configuring Cisco Identity Services Engine certification can lead to career advancement opportunities, such as network security engineer, security analyst, or security consultant. Implementing and Configuring Cisco Identity Services Engine certification also demonstrates the candidate’s commitment to professional development and continuous learning.
To pass the Cisco 300-715 exam, candidates must have a strong understanding of network security principles and be familiar with Cisco technologies such as Cisco TrustSec, Cisco AnyConnect, and Cisco Identity Services Engine (ISE). Successful candidates will be able to design and deploy secure network infrastructures using Cisco technologies and best practices, and will be able to effectively troubleshoot issues related to network security and access control.
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Web Auth and guest services
The following will be discussed in CISCO 300-715 exam dumps:
- Configure Cisco TrustSec
- Configure 802.1X phasing deployment
- Closed mode
- Configure policies including authentication and authorization profiles
Download the Latest 300-715 Dump - 2024 300-715 Exam Question Bank: https://passleader.testpassking.com/300-715-exam-testking-pass.html